Full Pallet
 
Ultra Tile Pro Flex SP+ES is a single part, standard setting, flexible adhesive for wall and floor tiles. It is specially formulated with extended workability, enhanced adhesion and flexibility, making it ideal for areas where slight movement or vibration can occur. Classified as S1 in accordance with EN12004 it has the high level of deformation for greater tolerance to movement. Ultra Tile Pro Flex SP+ES is a polymer modified adhesive which provides enhanced performance and high bond strength including installations subject to moisture. It has extended set properties for contractors who prefer a longer pot life. It is able to take light foot traffic within 18 hours of installation depending upon temperature and substrate.
NB: Porous natural stone tiles need to be checked for compatibility to avoid staining.
KEY AREAS OF USE
General wall installations
General floor installations
Interior installations
Exterior installations
Wet rooms
Domestic showers with tray
Communal showers
Swimming pools
Electric matting underfloor heating
Piped water underfloor heating
Conservatories
SUITABLE TILES
 
Ceramic
Porcelain
Glass Mosaics
Marble
Travertine
Granite
Limestone
Terracotta
Quarry
Slate
Quartz Brick slips
SUITABLE SURFACES & SUBSTRATES
 
Concrete
Sand/cement screed
Plywood overlay - 15mm min
Tile backer boards
Cement faced fibre boards
Anhydrite/calcium sulphate/gypsum based screeds
Tile on Tile *
Firm and stable plaster
Plasterboard
Sand/cement render
Concrete brick/block
Hard vinyl tiles
Flooring grade asphalt
*Existing ceramic, porcelain and natural stone tiles (overlay) known as Tile on Tile
 
TECHNICAL DATA
 
Unit Size: 20kg Bags
Colours: White
Classification: EN12004 Class C2FT S1
Bed Thickness: 3mm – 20mm
Grout After *: 18 hours
Coverage: 4.5kg per square metre at 3mm Bed Thickness
Pot Life *: 2 Hours at 20 degree celsius
Set Time *: 16 Hours at 20 degree celsius
Application Temperatures: 5 degree celsius to 25 degree celsius
* Depending on temperatures, substrates and site conditions
 
SURFACE PREPARATION
 
All wall and floor substrates must be clean, dry, firm and stable, free of dust, dirt, oil and grease. Substrates should be strong enough to support the weight of the adhesive and tiles being fixed (see technical for loadings).